ENVIROWIPE is a soy & citrus based cleaner that removes plastisol and other inks without attacking the emulsion. It is also an excellent cleaner for the removal of pallet and belt printer's adhesives.
- Emulsion Safe
- Mesh Safe
- Non Flammable
- Low Odor
- Non Toxic
- High Load Capacity - reduces usage
- Use as a parts washer or recirculating cleaner
SPRAY / WIPE SCREEN OPENER
Card excessive ink from the screen. Apply product to the screen and wipe both sides of screen thoroughly with a clean towel. Use when cataloging the screen.
Quick Tip: To cut down on the number of rags it takes to clean a screen, use a non absorbent scrub pad to liquefy the ink and a squeegee to pull all the ink to one end of the screen and wipe up with one or two rags.
Card excessive ink from the screen. ENVIROWIPE can be continuously re-circulated until product becomes too heavily soiled with solids. Used product may be filtered and re-used.
Apply product to adhesive and allow to dwell for 30 to 90 seconds. Remove adhesive using a scraper, towel or rag.
Always dispose of used chemicals in accordance with local, state, and federal regulations.