Product Description
Majestic Black is an economical black that works great for manual or automatic presses. This black holds good edge definition while providing a soft hand. Though the body of this black is slightly stiffer than other WM Plastics blacks, it still prints easily.
Use for direct printing on light to dark colored garments, cotton, cotton blends, & polyester.
Features
- Smooth Body
- Great Coverage
- Clears Well
- No build-up
- Washes up with any plastisol cleaner
Specifications
- Bleed resistance: None
- Opacity: High
- Store at 65-80F
- Keep out of direct sunlight
- Mesh: 86-300
- Stencil: Any direct emulsion or capillary film
- Can be printed wet-on-wet
- Squeegee: Sharp, Medium to Hard, 45 degree angle
- Flash: 700F for 8 seconds. Just enough so the surface is tack free.
- Fusion/Curing: 325F for 1-1.5 minutes. Oven temp can be increased and dwell time decrease. For heat presses use 390F for 8 seconds
Additives
- Curable Reducer I10-9906 to reduce viscosity
- G&S Base I10-1020 to improve stretch
- Puff Additive I10-9903
- Soft Hand Base I10-0111 to extend color.
Note: If ink rubs off on a white cloth, or cracks, temp and/or dwell time should be increased. Do not dry clean, and always test on fabric to be printed!
