Liquid Blockout and Screen Tape

PMI tapes easily mask off large areas of your screen without leaving an adhesive residue.

First Print

Blockout Pen

Blockout pen to fill in pinholes in your stencil. These Blockout pens have an ultra fast drying time of 30 to 90 seconds and are water soluble. Recommended for plastisol, UV, and most solvent based inks. Reclaims with warm tap water. Note:...

MSRP:

Now: $10.99
Choose Options
PMI

PMI 321 Vinyl Blockout Tape

PMI #321 White Vinyl Blockout Tape for taping screens 2 mil thick Each roll is 110 Yds long

MSRP:

Was:

Now: $7.04 - $168.96

Choose Options
PMI

PMI 451 Full Adhesive Tape

For taping further into the screen, taping the print side of screens as a block out tape, and masking the inside of wood frames. Same adhesive and backing as Split Tape allowing for a clean removal, just without the blue adhesive-free areas. All rolls...

MSRP:

Was:

Now: $5.45 - $199.95

Choose Options
PMI

PMI 451 Split Tape

For masking the inside of rigid aluminum, roller, and wood frames. Blue areas are non-adhesive allowing Split Tape to peel cleanly without leaving residue, tearing, or damaging your emulsion. All rolls are 60 yards long, and are available as single...

MSRP:

Was:

Now: $5.45 - $199.95

Choose Options
PMI

PMI 260 Quick Rip Tape

For taping the print side of screens as a block out tape. Hand-tearable with a blue non-adhesive edge providing a tab to lift Quick Rip Tape from the screen. Same adhesive and backing as Split Tape allowing for a clean removal. All rolls 60 yards long...

MSRP:

Was:

Now: $5.45 - $190.58

Choose Options
NOBULL

NoBull Masking Tape

Semi-Crepe Masking Tape in 48mm/2 inch, and 72mm/3 inch widths. All are 55m/60 yards long. Available in individual rolls or by the case. 2 inch rolls are 24 to a case. 3 inch rolls are 16 to a case

MSRP:

Was:

Now: $4.77 - $114.72

Choose Options
Nekoosa

Nekoosa ScreenSeal GXF-5002-479 Blue MDPE Tape

Easy unwinding tape rolls with no stringy legging adhesive Blue Block Out is easy to apply and removes cleanly from frames and mesh with no adhesive residue. Durable during pressure washes and solvent baths. Water based adhesive resists attacks by...

MSRP:

Was:

Now: $7.94 - $285.84

Choose Options
CCI

CCI RED-COAT blockout

Red-Coat is a medium viscosity, water-soluble red blockout designed to fill the open areas of the screen not covered by the emulsion. Use for masking several designs on a screen until ready to print or for multi-color work. Red-Coat is also very...

MSRP:

Was:

Now: $14.23 - $117.08

Choose Options
CCI

CCI QUIK-DRY blockout

QUIK-DRY is a low viscosity, water-soluble green blockout designed to fill the open areas of the screen not covered by the emulsion. Use for masking several designs on a screen until ready to print or for multi-color work. QUIK-DRY is also very good...

MSRP:

Was:

Now: $14.12 - $109.08

Choose Options
CCI

CCI Ultra-Block

ULTRA-BLOCK is a high viscosity, water-soluble blue blockout designed to fill the open areas of the screen not covered by the emulsion. Use for masking several designs on a screen until ready to print or for multi-color work...

MSRP:

Was:

Now: $13.70 - $124.23

Choose Options
CCI

CCI Aqua Block

Aqua-Block is a water-based, yet water resistant, violet block-out designed to fill the open areas of the screen not covered by the emulsion. Use for masking several designs on a screen until ready to print or for multi-color work. Aqua-Block is very...

MSRP:

Was:

Now: $22.50 - $192.08

Choose Options
SAATI

Saati Finish S1 Red

Saati SAATIchem Finish S1 Red liquid blockout / filler Use with solvent, UV-curable, and plastisol inks. Water-based, contains no solvents and is pleasant smelling. Spreads smoothly and uniformly for optimum filling and drying. Use to cover open mesh...

MSRP:

Was:

Now: $10.06 - $143.00

Choose Options
SAATI

Saati Finish S2 Blue

Saati Finish S2 Blue Liquid Blockout and Filler Saati Finish S2 blue blockout is thicker than the Finish S1, features increased filling power when used on coarse mesh, and more resistance to breakdown in high-stress printing such as with cylinder...

MSRP:

Was:

Now: $10.94 - $152.58

Choose Options