Product Description
LC (Low Cure) series by WM Plastics is for the most difficult substrates. Curing at 230° F, this ink can be printed onto 100% cotton, without the worry of ghosting, all the way up to 100% polyester garments, some sublimated garments and other substrates sensitive to heat such as grocery bags. Holds up to the worst bleeders, and will also cut-down on power consumption lowering energy costs and keep shops cooler.
- Superb Bleed Resistance
- No Ghosting
- Great Stretchability
- Easy to print viscosity
- Great replacement for silicone inks
- Flat, smooth finish for multi-color printing
Direct Printing on white or colored garments
100% cotton, Cotton/Polyester, Acrylic, Polyester, Polypropylene, Spandex, and stretchable substrates
- Bleed Resistance: Excellent
- Opacity: High
- Storage: 70°-80°F. Due to the ability to cure at low temperatures, this extremely important. Ink will become thicker over time but can be reduced to a printable viscosity
- Mesh: 61-230, 110 or lower recommended for underlay printing
- Stencil: Any direct emulsion or capillary film
- Wet-On-Wet Printing: Yes
- Modifiers are not recommended.
- Squeegee: Medium to Hard, Sharp, at a 45° angle
- Flashing: 700°F for 3-5 seconds, just enough for the surface to be tack free.
- Fusion/Curing: 230°F/121°C for 1½ to 2½ minutes. 325°F/163°C for 1 to 1½ minutes.
