Product Description
For Cotton/Poly Blends, and 100% Polyester
7041 Paramount White is an ultra low bleed, high pigment, fast flashing, low tack, non-phthalate plastisol screen printing ink formulated to help block dye migration problems on various problem polyester content fabrics. It has a very creamy viscosity and is very easy to print. As a result, less pressure is needed to print to clear the screen.
SPOT FLASHING
7041 Paramount White™ will spot dry, with a very low after flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should be just dry to the touch, with no lift o , but not totally fused. Totally fusing the underprint may cause inter-coat adhesion problems with the inks printed on top. Final fusing or curing should occur in the dryer.
IMPORTANT INFORMATION
7041 Paramount White™ is an ultra low bleed ink, not a non-bleed ink. On some types of fabric, bleeding or dye migration may occur. Always test print the fabric to be printed before beginning production. It is best to do some long term testing on fabrics to determine if they are going to bleed. Bleeding or dye migration may not occur right away.
Adding any reducers or additives can lower the bleed resistance, opacity, or increase cure times of ink. STIR the ink prior to printing on press and after addition of reducers or additives.
Excessive squeegee pressure, when using 7041 Paramount White™, will drive the ink through the fabric, making the ink look less opaque. Again, adding too much reducer will also cause loss of opacity.
Test dryer temperatures and wash test printed product before and during a production run.
Ghosting, or fabric discoloration may occur when using this product on some 100% cotton fabrics. Always test for ghosting, dye or pigment migration or bleeding on any 100% cotton fabric before beginning production.
