Product Description
Radiant White is WM’s newest and best bleed resistant white in the Midori series. This white has a vibrant sheen, prints flat and has great coverage. The body of the white is thicker than our other whites, but still prints nicely.
Applications
- Direct printing
- White or colored garments
- 100% Cotton
- Cotton/Polyester
- Acrylic
- Polyester
- Polypropylene
- Spandex and stretchable substrates
Features
- Superb Bleed Resistance
- Great Stretchability
- Easy to print viscosity
- Flat, smooth finish for multi-color printing
- Vibrant
- Mesh: 61-180
- Stencil: Any direct emulsion or capillary film.
- Wet on Wet Printing: Can be printed wet-on-wet to increase production.
- Modifications: Modifications are not recommended unless completely necessary. ANY modification will effect curing properties
- To reduce viscosity use Curable Reducer (I10-9906)
- To improve stretch use G&S Base (I10-1020)
- For puff use Puff Additive (I10-9903)
- Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
- Flashing: 700ºF for 3-5 seconds, just enough for the surface to be tack free.
- Squeegee Blade: Sharp.
- Fusion/Curing: 260 F/127 C-325 F/163 C for 1 to 1 ½ minutes.
- Bleed Resistance: Excellent
- Opacity: High
- Storage: 65 to 80 F. Keep out of direct sunlight
- Wash-up: Any plastisol cleaner.
Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always
test on fabric to be printed.
