Product Description
- Reduces the viscosity of an ink to make it easier to print.
- Use up to 15% by weight, but can go higher if needed. 5% by weight will lower the viscosity of most inks by 25%.
- Curable by itself so you can add as much as you need without the worry of your ink not curing.
- Improves wet-on-wet printability of colors.
- Does not impact flash times.
- Does not impact curing time of traditional inks that cure at 325 F degrees.
- Not recommended to be used in low cure inks.
- Use with Poly inks could reduce bleed resistance.
- Wash-up with any plastisol cleaner.
