International Coatings Guardian Gray 7043 For use on 50/50 Cotton/Polyester Blends, 100% Polyesters International Coatings 7043 Guardian Gray blocks dye migration on problem fabrics that contain polyester, including sublimated dyed fabrics. It can take a variety of top coats depending... MSRP: Was: Now: $70.00 - $655.00 Choose Options
SAATI SAATI Direct Prep 4 Screen Degreaser for Diazo and and Dual-Cure Emulsions Saati DIRECT PREP 4 screen degreaser SaatiChem Direct Prep 4 is a ready-to-use, detergent-based mesh degreaser. Use in spray applications with diazo and dual-cure emulsions to reduce fisheyes and pinholes, and improve emulsion adhesion. Can... MSRP: Was: Now: $10.23 - $100.69 Choose Options
CCI CCI Citra-Paste CCI Citra-Paste Ink Degradant is a semi-viscous, water soluble cleaner for the removal of a variety of inks, especially plastisol and water based inks, without attacking the emulsion. Can be used for total removal of inks before reclaiming the... MSRP: Was: Now: $13.38 - $142.15 Choose Options
Kor-Chem Kor-Chem Bio-6 Kor-Chem BIO-6 Bio-6 is a powerful screen wash, stain remover and degreaser for use on textile and graphic inks. This product works on contact to immediately penetrate, dissolve, and remove ink from screens. Bio-6 has safe, non-caustic stain removers... MSRP: Was: Now: $19.43 - $255.77 Choose Options
Kor-Chem Kor-Chem Bio-7 Kor-Chem Bio-7 Bio-7 is a powerful ink degradent, stain remover and degreaser for textile and graphic screen inks. The highly active formula of Bio-7 works on contact by immediately penetrating and dissolving plastisol, UV, conventional/solvent based,... MSRP: Was: Now: $18.17 - $238.94 Choose Options
SAATI Saati Diazo 11 SAATI DIAZO 11 is a light sensitive activator for producing screen-printing stencils. Instructions Add clean filtered water to the bottle, shake and allow to sit for 1 hour. Add this to the gallon bucket of emulsion and stir well. Emulsion should... MSRP: Was: Now: $9.97 - $44.60 Choose Options
Kor-Chem Kor-Chem Hands Down Kor-Chem Hands Down Hands Down is a heavy-duty hand cleaner specially formulated with scrubbing microbeads that provide a gentle deep cleaning action. It easily penetrates, cleans and removes ink, paint, coatings, grease, oil, dirt and virtually all... MSRP: Now: $35.70 Choose Options SAATI SAATI HC8 Hand Cleaner Personal cleaner designed for safe and easy removal of the toughest industrial dirt and grime including inks, oils & grease, paints, plumbers putty and other oily soils. Green Apple or Cherry Red Scent Water-based lotion Mildly abrasive to... MSRP: Was: Now: $3.45 - $37.45 Choose Options CCI CCI Hand Pro Hand Cleaner with Conditioner ProChem Hand Pro is a heavy duty, waterless, hand cleaner and conditioner containing pumice. It is formulated to remove ink, grease, and adhesives. This product is an organic-based, non-toxic cleaner, which is water-soluble. ProChem Hand Pro’s... MSRP: Was: Now: $16.36 - $175.08 Choose Options Sprayway Sprayway Crazy Clean Wipes Gentle citrus-scented towels Strong enough to cut through tar, grease, wax, ink, paint, lubricants and adhesives Waterless cleaner fortified with an emollient and natural oils The perfect product when you don't have access to soap and water Quick... MSRP: Was: Now: $26.45 - $132.23 Choose Options CCI CCI Envirowipes 150ct CCI EnviroWipes are an environmentally friendly solution that’s tough enough to clean screens and many other substrates. EnviroWipes Ink and Screen Wipes are made for screen printing applications using plastisol and water-based inks. These... MSRP: Now: $41.38 Choose Options Screen Scrubber, Blue with Handle Abrasive nylon pad with permanently attached handle. 6" x 3.5" x 1" Blue, medium abrasive pad MSRP: Was: Now: $2.49 - $51.95 Choose Options Replaceable Scrubber Pad, Medium Red A replaceable medium-duty scrub pad for ink removal, emulsion removal, and de-hazing. Use with the teal scrub handle and save money by replacing just the pad. 6 inch by 3.5 inch by 1 inch MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle This reusable scrub pad handle has fine plastic bristles that hold the replaceable scrub pads tight to the handle. The handle will outlast several replaceable pads MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 Type a description for this product here... MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 Gloss and Stretch (G&S) Base is a multi-use base that can be used as an underlay for stretch (lycra),a stretch additive, glitter base, foil adhesive, and can be used with a Pigment Concentrate (PC) system. Creates a super high gloss... MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 Type a description for this product here... MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 An intermediate black with a soft creamy body, though not as creamy as Black Cream. Popular with automatic and manual printers. Bleed Resistance: None Opacity: High Storage: Ideally 65-80°F. Keep out of direct sunlight Mesh: 80-300... MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 Puff additive creates a raised, puff effect. Surface is slightly rougher compared to the suede effect Light to dark colored garments Cotton Poly with underlay Blends with underlay Use: 10-15% by weight. Flashing: 700 F for 9 seconds, just... MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 Reduces the viscosity of an ink to make it easier to print. Use up to 15% by weight, but can go higher if needed. 5% by weight will lower the viscosity of most inks by 25%. Curable by itself so you can add as much as you need without the worry of... MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 Creates a matte finish for the ink, or provides a raised, velvety textured effect Applications Light to dark colored garments Cotton Poly with underlay Blends with underlay For a dulling/matte finish use up to 5% by weight.For a... MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 Reduces viscosity of textile inks fast and easily. Breaks down the thickest of inks with ease at lower loadings. Performs faster than the competition and our own Curable Reducer without having to add as much. Does Not Cure like our Curable Reducer.Use up... MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 Type a description for this product here... MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 Reduces curing temperatures of most plastisol inks down to 300ºF or less to aid in printing garments that are prone to bleeding or can be damaged by higher temperatures. Applications Garments prone to dye migration Heat-sensitive materials... MSRP: Was: Now: $50.70 - $583.04 Choose Options International Coatings Guardian Gray 7043 MSRP: Was: Now: $70.00 - $655.00 Choose Options SAATI SAATI Direct Prep 4 Screen Degreaser for Diazo and and Dual-Cure Emulsions MSRP: Was: Now: $10.23 - $100.69 Choose Options CCI CCI Citra-Paste MSRP: Was: Now: $13.38 - $142.15 Choose Options Kor-Chem Kor-Chem Bio-6 MSRP: Was: Now: $19.43 - $255.77 Choose Options Kor-Chem Kor-Chem Bio-7 MSRP: Was: Now: $18.17 - $238.94 Choose Options SAATI Saati Diazo 11 MSRP: Was: Now: $9.97 - $44.60 Choose Options Kor-Chem Kor-Chem Hands Down MSRP: Now: $35.70 Choose Options SAATI SAATI HC8 Hand Cleaner MSRP: Was: Now: $3.45 - $37.45 Choose Options CCI CCI Hand Pro Hand Cleaner with Conditioner MSRP: Was: Now: $16.36 - $175.08 Choose Options Sprayway Sprayway Crazy Clean Wipes MSRP: Was: Now: $26.45 - $132.23 Choose Options CCI CCI Envirowipes 150ct MSRP: Now: $41.38 Choose Options Screen Scrubber, Blue with Handle MSRP: Was: Now: $2.49 - $51.95 Choose Options Replaceable Scrubber Pad, Medium Red MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 MSRP: Was: Now: $50.70 - $583.04 Choose Options Previous 5 6 7 8 9 10 11 Next Previous 5 6 7 8 9 10 11 Next Compare Selected × OK
SAATI SAATI HC8 Hand Cleaner Personal cleaner designed for safe and easy removal of the toughest industrial dirt and grime including inks, oils & grease, paints, plumbers putty and other oily soils. Green Apple or Cherry Red Scent Water-based lotion Mildly abrasive to... MSRP: Was: Now: $3.45 - $37.45 Choose Options
CCI CCI Hand Pro Hand Cleaner with Conditioner ProChem Hand Pro is a heavy duty, waterless, hand cleaner and conditioner containing pumice. It is formulated to remove ink, grease, and adhesives. This product is an organic-based, non-toxic cleaner, which is water-soluble. ProChem Hand Pro’s... MSRP: Was: Now: $16.36 - $175.08 Choose Options
Sprayway Sprayway Crazy Clean Wipes Gentle citrus-scented towels Strong enough to cut through tar, grease, wax, ink, paint, lubricants and adhesives Waterless cleaner fortified with an emollient and natural oils The perfect product when you don't have access to soap and water Quick... MSRP: Was: Now: $26.45 - $132.23 Choose Options
CCI CCI Envirowipes 150ct CCI EnviroWipes are an environmentally friendly solution that’s tough enough to clean screens and many other substrates. EnviroWipes Ink and Screen Wipes are made for screen printing applications using plastisol and water-based inks. These... MSRP: Now: $41.38 Choose Options Screen Scrubber, Blue with Handle Abrasive nylon pad with permanently attached handle. 6" x 3.5" x 1" Blue, medium abrasive pad MSRP: Was: Now: $2.49 - $51.95 Choose Options Replaceable Scrubber Pad, Medium Red A replaceable medium-duty scrub pad for ink removal, emulsion removal, and de-hazing. Use with the teal scrub handle and save money by replacing just the pad. 6 inch by 3.5 inch by 1 inch MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle This reusable scrub pad handle has fine plastic bristles that hold the replaceable scrub pads tight to the handle. The handle will outlast several replaceable pads MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 Type a description for this product here... MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 Gloss and Stretch (G&S) Base is a multi-use base that can be used as an underlay for stretch (lycra),a stretch additive, glitter base, foil adhesive, and can be used with a Pigment Concentrate (PC) system. Creates a super high gloss... MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 Type a description for this product here... MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 An intermediate black with a soft creamy body, though not as creamy as Black Cream. Popular with automatic and manual printers. Bleed Resistance: None Opacity: High Storage: Ideally 65-80°F. Keep out of direct sunlight Mesh: 80-300... MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 Puff additive creates a raised, puff effect. Surface is slightly rougher compared to the suede effect Light to dark colored garments Cotton Poly with underlay Blends with underlay Use: 10-15% by weight. Flashing: 700 F for 9 seconds, just... MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 Reduces the viscosity of an ink to make it easier to print. Use up to 15% by weight, but can go higher if needed. 5% by weight will lower the viscosity of most inks by 25%. Curable by itself so you can add as much as you need without the worry of... MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 Creates a matte finish for the ink, or provides a raised, velvety textured effect Applications Light to dark colored garments Cotton Poly with underlay Blends with underlay For a dulling/matte finish use up to 5% by weight.For a... MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 Reduces viscosity of textile inks fast and easily. Breaks down the thickest of inks with ease at lower loadings. Performs faster than the competition and our own Curable Reducer without having to add as much. Does Not Cure like our Curable Reducer.Use up... MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 Type a description for this product here... MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 Reduces curing temperatures of most plastisol inks down to 300ºF or less to aid in printing garments that are prone to bleeding or can be damaged by higher temperatures. Applications Garments prone to dye migration Heat-sensitive materials... MSRP: Was: Now: $50.70 - $583.04 Choose Options International Coatings Guardian Gray 7043 MSRP: Was: Now: $70.00 - $655.00 Choose Options SAATI SAATI Direct Prep 4 Screen Degreaser for Diazo and and Dual-Cure Emulsions MSRP: Was: Now: $10.23 - $100.69 Choose Options CCI CCI Citra-Paste MSRP: Was: Now: $13.38 - $142.15 Choose Options Kor-Chem Kor-Chem Bio-6 MSRP: Was: Now: $19.43 - $255.77 Choose Options Kor-Chem Kor-Chem Bio-7 MSRP: Was: Now: $18.17 - $238.94 Choose Options SAATI Saati Diazo 11 MSRP: Was: Now: $9.97 - $44.60 Choose Options Kor-Chem Kor-Chem Hands Down MSRP: Now: $35.70 Choose Options SAATI SAATI HC8 Hand Cleaner MSRP: Was: Now: $3.45 - $37.45 Choose Options CCI CCI Hand Pro Hand Cleaner with Conditioner MSRP: Was: Now: $16.36 - $175.08 Choose Options Sprayway Sprayway Crazy Clean Wipes MSRP: Was: Now: $26.45 - $132.23 Choose Options CCI CCI Envirowipes 150ct MSRP: Now: $41.38 Choose Options Screen Scrubber, Blue with Handle MSRP: Was: Now: $2.49 - $51.95 Choose Options Replaceable Scrubber Pad, Medium Red MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 MSRP: Was: Now: $50.70 - $583.04 Choose Options Previous 5 6 7 8 9 10 11 Next Previous 5 6 7 8 9 10 11 Next Compare Selected × OK
Screen Scrubber, Blue with Handle Abrasive nylon pad with permanently attached handle. 6" x 3.5" x 1" Blue, medium abrasive pad MSRP: Was: Now: $2.49 - $51.95 Choose Options
Replaceable Scrubber Pad, Medium Red A replaceable medium-duty scrub pad for ink removal, emulsion removal, and de-hazing. Use with the teal scrub handle and save money by replacing just the pad. 6 inch by 3.5 inch by 1 inch MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle This reusable scrub pad handle has fine plastic bristles that hold the replaceable scrub pads tight to the handle. The handle will outlast several replaceable pads MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 Type a description for this product here... MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 Gloss and Stretch (G&S) Base is a multi-use base that can be used as an underlay for stretch (lycra),a stretch additive, glitter base, foil adhesive, and can be used with a Pigment Concentrate (PC) system. Creates a super high gloss... MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 Type a description for this product here... MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 An intermediate black with a soft creamy body, though not as creamy as Black Cream. Popular with automatic and manual printers. Bleed Resistance: None Opacity: High Storage: Ideally 65-80°F. Keep out of direct sunlight Mesh: 80-300... MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 Puff additive creates a raised, puff effect. Surface is slightly rougher compared to the suede effect Light to dark colored garments Cotton Poly with underlay Blends with underlay Use: 10-15% by weight. Flashing: 700 F for 9 seconds, just... MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 Reduces the viscosity of an ink to make it easier to print. Use up to 15% by weight, but can go higher if needed. 5% by weight will lower the viscosity of most inks by 25%. Curable by itself so you can add as much as you need without the worry of... MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 Creates a matte finish for the ink, or provides a raised, velvety textured effect Applications Light to dark colored garments Cotton Poly with underlay Blends with underlay For a dulling/matte finish use up to 5% by weight.For a... MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 Reduces viscosity of textile inks fast and easily. Breaks down the thickest of inks with ease at lower loadings. Performs faster than the competition and our own Curable Reducer without having to add as much. Does Not Cure like our Curable Reducer.Use up... MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 Type a description for this product here... MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 Reduces curing temperatures of most plastisol inks down to 300ºF or less to aid in printing garments that are prone to bleeding or can be damaged by higher temperatures. Applications Garments prone to dye migration Heat-sensitive materials... MSRP: Was: Now: $50.70 - $583.04 Choose Options International Coatings Guardian Gray 7043 MSRP: Was: Now: $70.00 - $655.00 Choose Options SAATI SAATI Direct Prep 4 Screen Degreaser for Diazo and and Dual-Cure Emulsions MSRP: Was: Now: $10.23 - $100.69 Choose Options CCI CCI Citra-Paste MSRP: Was: Now: $13.38 - $142.15 Choose Options Kor-Chem Kor-Chem Bio-6 MSRP: Was: Now: $19.43 - $255.77 Choose Options Kor-Chem Kor-Chem Bio-7 MSRP: Was: Now: $18.17 - $238.94 Choose Options SAATI Saati Diazo 11 MSRP: Was: Now: $9.97 - $44.60 Choose Options Kor-Chem Kor-Chem Hands Down MSRP: Now: $35.70 Choose Options SAATI SAATI HC8 Hand Cleaner MSRP: Was: Now: $3.45 - $37.45 Choose Options CCI CCI Hand Pro Hand Cleaner with Conditioner MSRP: Was: Now: $16.36 - $175.08 Choose Options Sprayway Sprayway Crazy Clean Wipes MSRP: Was: Now: $26.45 - $132.23 Choose Options CCI CCI Envirowipes 150ct MSRP: Now: $41.38 Choose Options Screen Scrubber, Blue with Handle MSRP: Was: Now: $2.49 - $51.95 Choose Options Replaceable Scrubber Pad, Medium Red MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 MSRP: Was: Now: $50.70 - $583.04 Choose Options Previous 5 6 7 8 9 10 11 Next Previous 5 6 7 8 9 10 11 Next Compare Selected × OK
Replaceable Scrubber Handle This reusable scrub pad handle has fine plastic bristles that hold the replaceable scrub pads tight to the handle. The handle will outlast several replaceable pads MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 Type a description for this product here... MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 Gloss and Stretch (G&S) Base is a multi-use base that can be used as an underlay for stretch (lycra),a stretch additive, glitter base, foil adhesive, and can be used with a Pigment Concentrate (PC) system. Creates a super high gloss... MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 Type a description for this product here... MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 An intermediate black with a soft creamy body, though not as creamy as Black Cream. Popular with automatic and manual printers. Bleed Resistance: None Opacity: High Storage: Ideally 65-80°F. Keep out of direct sunlight Mesh: 80-300... MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 Puff additive creates a raised, puff effect. Surface is slightly rougher compared to the suede effect Light to dark colored garments Cotton Poly with underlay Blends with underlay Use: 10-15% by weight. Flashing: 700 F for 9 seconds, just... MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 Reduces the viscosity of an ink to make it easier to print. Use up to 15% by weight, but can go higher if needed. 5% by weight will lower the viscosity of most inks by 25%. Curable by itself so you can add as much as you need without the worry of... MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 Creates a matte finish for the ink, or provides a raised, velvety textured effect Applications Light to dark colored garments Cotton Poly with underlay Blends with underlay For a dulling/matte finish use up to 5% by weight.For a... MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 Reduces viscosity of textile inks fast and easily. Breaks down the thickest of inks with ease at lower loadings. Performs faster than the competition and our own Curable Reducer without having to add as much. Does Not Cure like our Curable Reducer.Use up... MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 Type a description for this product here... MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 Reduces curing temperatures of most plastisol inks down to 300ºF or less to aid in printing garments that are prone to bleeding or can be damaged by higher temperatures. Applications Garments prone to dye migration Heat-sensitive materials... MSRP: Was: Now: $50.70 - $583.04 Choose Options International Coatings Guardian Gray 7043 MSRP: Was: Now: $70.00 - $655.00 Choose Options SAATI SAATI Direct Prep 4 Screen Degreaser for Diazo and and Dual-Cure Emulsions MSRP: Was: Now: $10.23 - $100.69 Choose Options CCI CCI Citra-Paste MSRP: Was: Now: $13.38 - $142.15 Choose Options Kor-Chem Kor-Chem Bio-6 MSRP: Was: Now: $19.43 - $255.77 Choose Options Kor-Chem Kor-Chem Bio-7 MSRP: Was: Now: $18.17 - $238.94 Choose Options SAATI Saati Diazo 11 MSRP: Was: Now: $9.97 - $44.60 Choose Options Kor-Chem Kor-Chem Hands Down MSRP: Now: $35.70 Choose Options SAATI SAATI HC8 Hand Cleaner MSRP: Was: Now: $3.45 - $37.45 Choose Options CCI CCI Hand Pro Hand Cleaner with Conditioner MSRP: Was: Now: $16.36 - $175.08 Choose Options Sprayway Sprayway Crazy Clean Wipes MSRP: Was: Now: $26.45 - $132.23 Choose Options CCI CCI Envirowipes 150ct MSRP: Now: $41.38 Choose Options Screen Scrubber, Blue with Handle MSRP: Was: Now: $2.49 - $51.95 Choose Options Replaceable Scrubber Pad, Medium Red MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 MSRP: Was: Now: $50.70 - $583.04 Choose Options Previous 5 6 7 8 9 10 11 Next Previous 5 6 7 8 9 10 11 Next Compare Selected × OK
WM Plastics Base Soft Hand I10-0111 Type a description for this product here... MSRP: Was: Now: $31.53 - $286.76 Choose Options
WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 Gloss and Stretch (G&S) Base is a multi-use base that can be used as an underlay for stretch (lycra),a stretch additive, glitter base, foil adhesive, and can be used with a Pigment Concentrate (PC) system. Creates a super high gloss... MSRP: Was: Now: $35.95 - $342.72 Choose Options
WM Plastics Base Just So Soft I10-1044 Type a description for this product here... MSRP: Was: Now: $30.09 - $287.02 Choose Options
WM Plastics SPEC Black I10-2001 An intermediate black with a soft creamy body, though not as creamy as Black Cream. Popular with automatic and manual printers. Bleed Resistance: None Opacity: High Storage: Ideally 65-80°F. Keep out of direct sunlight Mesh: 80-300... MSRP: Was: Now: $28.93 - $268.85 Choose Options
WM Plastics Puff Additive I10-9903 Puff additive creates a raised, puff effect. Surface is slightly rougher compared to the suede effect Light to dark colored garments Cotton Poly with underlay Blends with underlay Use: 10-15% by weight. Flashing: 700 F for 9 seconds, just... MSRP: Was: Now: $109.55 - $1,421.59 Choose Options
WM Plastics Curable Reducer I10-9906 Reduces the viscosity of an ink to make it easier to print. Use up to 15% by weight, but can go higher if needed. 5% by weight will lower the viscosity of most inks by 25%. Curable by itself so you can add as much as you need without the worry of... MSRP: Was: Now: $32.69 - $309.10 Choose Options
WM Plastics Suede/Dulling Paste I10-9907 Creates a matte finish for the ink, or provides a raised, velvety textured effect Applications Light to dark colored garments Cotton Poly with underlay Blends with underlay For a dulling/matte finish use up to 5% by weight.For a... MSRP: Was: Now: $69.37 - $186.74 Choose Options
WM Plastics Reducer #2 I10-9930 Reduces viscosity of textile inks fast and easily. Breaks down the thickest of inks with ease at lower loadings. Performs faster than the competition and our own Curable Reducer without having to add as much. Does Not Cure like our Curable Reducer.Use up... MSRP: Was: Now: $29.32 - $186.75 Choose Options
WM Plastics Base Perfect Print I12-1002 Type a description for this product here... MSRP: Was: Now: $30.83 - $282.32 Choose Options
WM Plastics Low Cure Additive I30-1050 Reduces curing temperatures of most plastisol inks down to 300ºF or less to aid in printing garments that are prone to bleeding or can be damaged by higher temperatures. Applications Garments prone to dye migration Heat-sensitive materials... MSRP: Was: Now: $50.70 - $583.04 Choose Options
SAATI SAATI Direct Prep 4 Screen Degreaser for Diazo and and Dual-Cure Emulsions MSRP: Was: Now: $10.23 - $100.69 Choose Options
Kor-Chem Kor-Chem Hands Down MSRP: Now: $35.70 Choose Options SAATI SAATI HC8 Hand Cleaner MSRP: Was: Now: $3.45 - $37.45 Choose Options CCI CCI Hand Pro Hand Cleaner with Conditioner MSRP: Was: Now: $16.36 - $175.08 Choose Options Sprayway Sprayway Crazy Clean Wipes MSRP: Was: Now: $26.45 - $132.23 Choose Options CCI CCI Envirowipes 150ct MSRP: Now: $41.38 Choose Options Screen Scrubber, Blue with Handle MSRP: Was: Now: $2.49 - $51.95 Choose Options Replaceable Scrubber Pad, Medium Red MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 MSRP: Was: Now: $50.70 - $583.04 Choose Options Previous 5 6 7 8 9 10 11 Next Previous 5 6 7 8 9 10 11 Next Compare Selected × OK
CCI CCI Envirowipes 150ct MSRP: Now: $41.38 Choose Options Screen Scrubber, Blue with Handle MSRP: Was: Now: $2.49 - $51.95 Choose Options Replaceable Scrubber Pad, Medium Red MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 MSRP: Was: Now: $50.70 - $583.04 Choose Options Previous 5 6 7 8 9 10 11 Next Previous 5 6 7 8 9 10 11 Next Compare Selected × OK
Replaceable Scrubber Pad, Medium Red MSRP: Now: $0.98 Choose Options Replaceable Scrubber Handle MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 MSRP: Was: Now: $50.70 - $583.04 Choose Options Previous 5 6 7 8 9 10 11 Next Previous 5 6 7 8 9 10 11 Next Compare Selected
Replaceable Scrubber Handle MSRP: Now: $1.83 Choose Options WM Plastics Base Soft Hand I10-0111 MSRP: Was: Now: $31.53 - $286.76 Choose Options WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options WM Plastics Base Just So Soft I10-1044 MSRP: Was: Now: $30.09 - $287.02 Choose Options WM Plastics SPEC Black I10-2001 MSRP: Was: Now: $28.93 - $268.85 Choose Options WM Plastics Puff Additive I10-9903 MSRP: Was: Now: $109.55 - $1,421.59 Choose Options WM Plastics Curable Reducer I10-9906 MSRP: Was: Now: $32.69 - $309.10 Choose Options WM Plastics Suede/Dulling Paste I10-9907 MSRP: Was: Now: $69.37 - $186.74 Choose Options WM Plastics Reducer #2 I10-9930 MSRP: Was: Now: $29.32 - $186.75 Choose Options WM Plastics Base Perfect Print I12-1002 MSRP: Was: Now: $30.83 - $282.32 Choose Options WM Plastics Low Cure Additive I30-1050 MSRP: Was: Now: $50.70 - $583.04 Choose Options Previous 5 6 7 8 9 10 11 Next Previous 5 6 7 8 9 10 11 Next Compare Selected
WM Plastics Base Fast Fusion G&S/Foil Adhesive I10-1020 MSRP: Was: Now: $35.95 - $342.72 Choose Options
